Product Manual

TS Obs Properties in the Right Panel
MAGNET Tools ver 1.0
97
Properties Window: General tab for a
TS observation (Right Panel of the TS
Obs Tab)
You can open this tab after selecting the Properties command from
the pop-up menu for the highlighted line in the right panel of the TS
Obs tab. This tab contains the fields:
• Icon
- a symbol associated with the TS observation. For details,
see a list of symbols in the left panel of the TS Obs tab
.
• #
- the number of the TS observation contained in the raw file.
You cannot edit this parameter.
• Point From
- the name of the point at which the Total Station was
set. You cannot edit this name.
• Date
- the date and time of total station measurement. You cannot
edit this name.
• Code
- code of the TS observation. A TS observation can have
only one code. The code entered for a TS observation is
automatically displayed as code for the corresponding point in the
Point tab
. To edit the code, click on the highlighted field and
select a new one from the drop-down list of existing codes, enter
a new code(s), or set the Code to empty.
• String
- the string for the TS observation. The string entered for a
TS observation is automatically displayed as a string for the
corresponding point in the Point tab
. Using a complex of string
and codes allows you to automatically create a line in the job.
• Control Code
- the control code used for the TS observation. The
control code entered for a TS observation is automatically
displayed as control code for the corresponding point in the Point
tab.
• Control Code 2
- the control code used for the TS observation.
The Control Code 2 has the same functionality as Control Code.
• Source
- the path of the raw data on the computer disk drive, local
area network, or storage media.