Product Manual

TS Obs Properties in the Left Panel
MAGNET Tools ver 1.0
95
• Point Name
- the name of the point at which the Total Station was
set. You can set any point's name from the list.
• Instrument Height
- the vertical distance from the Instrument
Center Mark to the ground in the current linear units. To edit the
value, click on the highlighted field and enter a new value.
and check box:
Enabled
- if this check box is selected (default setting for the TS
occupation), the given TS occupation and all objects related to the
given observation(s) are included in adjustment, coordinate
calculation and export. If this parameter is unchecked, adjustment,
coordinate calculation and export will ignore the TS occupation(s)
and all objects related to the given observation(s).
Properties Window: Accuracy tab for
a TS Occupation (Left Panel of the TS
Obs Tab)
You can open this tab after selecting the Properties command from
the pop-up menu for the highlighted line in the left panel of the TS
Obs tab. This tab contains the fields:
• Instrument Centering Error
- the error of centering the Total
Station position over the mark in the current linear units. This
error will be taken into account during the adjustment of the
network with the given TS occupation. To edit the value, click on
the highlighted field and enter a new value.
• Instrument Height Error
- the measurement error of the Total
Station height over the mark in the current linear units. This error
will be taken into account during adjustment of the network with
the given TS occupation. To edit the value, click on the
highlighted field and enter a new value.
• Reflector Centering Error
- the error of centering the reflector
position over the mark in the current linear units. This error will
be taken into account during adjustment of the network with the