Product Manual

TS Obs Properties

MAGNET Tools ver 1.0

antenna properties for the rover station of the GPS observation using

the following fields:

• Antenna Type - the model of the GPS antenna used for the rover.

To change the antenna type, click and select another antenna type

from the drop-down list. Also you can create a custom antenna by

clicking the Custom button. See How to add a custom antenna

for

more details. NOTE: If the None antenna type is selected, the

software will use zero values for A1/A2 parameters and in this

case the antenna phase center for L1 and L2 frequencies

coincides with the Antenna Reference Point.

• Antenna Height

- the GPS antenna's height for the rover, in

current units. To edit the value, click on the highlighted column

and enter a new value.

• Antenna Height Method

- the method used to measure the rover

antenna height. You can change the type of the method (slant or

vertical) with the help of the drop-down list.

Vertical – measuring from the ground point to the antenna

reference point (ARP) located on the bottom of the receiver.

Slant – measuring from the ground point to the antenna slant

height measure mark (SHMM).

TS Obs Properties

The TS Obs tab displays a table containing two panels. Each panel

has its own the Properties window.

The Properties window for TS occupation (the left panel of the TS

Obs tab) contains the following tabs:

• General tab

• Accuracy tab

• Instrument tab