Product Manual

24
How to Enter Grade
1 Press the Y key to begin grade input.
The axis symbol will flash and it will go into grade entry
status.
2 Select positive or negative grade by pressing arrow keys
(Up or Down).
3 Move the cursor by pressing the arrow keys (Right or Left).
4 Increase or decrease the number by pressing the arrow keys (Up or Down).
5 Press the [ENT] key to finish input.
When holding down the [Y] key while the Y symbol is flashing, the flashing axis will reset
to 00.000%.
Single axis
Grade range:
Y: –5% to +25%
Y axis