Item Brochure

Your local Authorized Topcon dealer is:
topconpositioning.com
7400 National Drive • Livermore • CA 94550
[phone]
SPECIFICATIONS
Reflectorless Total Stations
• Advanced Security and Maintenance
with New TSshield™
• Fast and Powerful EDM
• Exclusive LongLink™ Communications
Functionality
• Advanced Angle Accuracy
• Super Long Battery Life – 36 Hours!
• Rugged, Waterproof Design
ES Series
MAGNET Field
Cloud connected field controller software for
use with total stations and GPS rovers. With
ES LongLink™ communication, the MAGNET
Field controller can be operated, with the
prism, at the point of measurement.
Specifications subject to change without notice. ©2012 Topcon Corporation
All rights reserved. P/N: 7010-2097 Rev. A Printed in U.S.A. 1/12
The Bluetooth
®
word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Topcon is under license. Other
trademarks and trade names are those of their respective owners.
For more specification information:
topconpositioning.com/es-series
ES Series
OPTIONAL SOFTWARE
MAGNET Solutions
A family of software solutions that streamlines the workflow for surveyors,
contractors, engineers and mapping professionals.
Angle Measurement
Min. Resolution/Accuracy
ES-101 0.5”/1”
ES-102 1”/2”
ES-103 1”/3”
ES-105 1”/5”
ES-107 1”/7”
IACS (Independent Angle Calibration System)
Standard on 1” & 2” models
Compensation Dual-axis compensator
Distance Measurement
Prism EDM Range 4000m (ES-107 3000m)
Prism EDM Accuracy 2mm+2ppm
Non-Prism Range 500m
Non-Prism Accuracy 3mm+2ppm (0.3-200m)
Measuring Time Fine: 0.9 sec
Rapid: 0.7 sec
Tracking: 0.3 sec
Communications
•
LongLink™ rover communications utilizing
Bluetooth
®
Class 1
•
USB 2.0 Slot (Host + Slave)
•
RS-232C Serial
General
Display/Keyboard Dual, Graphic, Backlit
LCD (ES-107 Single)
Battery Operation Up to 36 hours
Dust/Water Protection IP66
Wireless Connection Bluetooth
®
Class 1
Operating Range -30C to +60C
-35C to +60C*
*special arctic version
To watch a video on the ES, follow this QR code link:
MAGNET Office
Connect to the MAGNET
Cloud directly from your CAD
software. Office is full-featured
CAD and processing software,
or use MAGNET through direct
integration in Autodesk products.
MAGNET Enterprise
See every set of data and
stay connected with both
Field and Office with this
cloud managed interface.
Unprecedented productivity
can be yours with Enterprise.
© 2012 Google Map Data