Product Manual

7. APPLIED OPERATION AND SETTING OF VARIOUS FUNCTIONS
37
align with the standard position for the LS-80L.
The length of time the arrow key is pressed will change the speed at which the laser beam
grades. (The speed will change from low to high speed.) For Y-axis grading, follow steps
7
to 9 using keys.
* Display during arrow key operation
$
• When the , , , or key is pressed, the laser beam will emit even if auto leveling
starts.
• This mode can be used with the RC-60.
• When the RC-60 is used in an environment in which similar radio signals (wireless LAN, etc.)
are transmitted, and when the , , , or key is long-pushed in step
9, the laser
beam grading may stop. If this interferes with the operation, change the communication
channel for the RL-SV2S and RC-60 and try again.
C5.2 How to set remote controller communication channel(p. 24)
The laser beam is moving in the X (Y) + direction.
The laser beam is moving in the X (Y) - direction.