Product Manual

7. APPLIED OPERATION AND SETTING OF VARIOUS FUNCTIONS

 Matching Mode (Manual Slope)

This mode is used to align the grades of the laser calibration to the worked grade.

1 Horizontally rotate the laser beam of the RL-SV2S set

up at the standard height. (X+0.000%, Y+0.000%)

2 Adjust the height of the LS-80L installed on the pole

and align the standard position of the LS-80L with the

laser beam and fix.

3 Set up the LS-80L in step 2 on the grade surface.

4 Using the sight, roughly align and set the position of

the RL-SV2S on top of the tripod to the direction of the

LS-80L.

5 Press the key.

6 Press the key on the Matching Mode (SLOPE)

selection screen.

LS-80L