Product Manual

4. NOMENCLATURE
12
 RC-60 Nomenclature
• Turn ON the power of the RL-SV2S before using the RC-60.
Pressing one of the keys (or inserting the battery) will display the channel search (CH SErCH)
and begin transmission with the RL-SV2S.
• When the channel is not aligned with the RL-SV2S or when the RL-SV2S power is not turned
ON, the display will show "Transmission error with remote control" (p. 66). C12. ERROR
DISPLAY(p. 65), Setting channel (p. 47)
• Auto-cut off function: The power will turn OFF automatically if no key is pressed for
approximately 6 minutes. (To resume, press one of the keys to display the channel search [CH
SErCH] and transmission with the RL-SV2S will begin.)
Display
Enter key
X/Y axis selection key/Alignment key/
Up key
Strap hole
Menu key/Escape key
Arrow keys