Product Manual

Troubleshooting
PoweringProblems
66
P/N:7010‐1004
• RestoredefaultsettingsbyclearingtheNVRAM.See“PerformingaFactoryReset”onpage53.Thisrestoresthe
receiver’sparameterstothefactorydefaultsettingsanderasesthealmanacandephemerisfiles.Thisactiondoesnot
deletedatafilesfromthereceivermemory.
Iftheproblempersists,seethefollowingsectionsforothersolutions.
Powering Problems
Thefollowingaresomeofthe mostcommonlyencounteredpowerproblems.
Thereceiverdoesnotpowerup
• Thebatterymaybedischarged.
–Chargethebatteryovernight.See“ChargingtheBatteries”onpage31.
• Ifyouareusinganexternalpowersource,thecablemaybedisconnectedordamaged.
–Makesurethecableissecurelyconnectedandundamaged.
• Thereceivermayhaveadefectivechargerordefectivebattery.
–If,afterchangingthebatteryorconnectinganexternalpowersource,thereceiverstilldoesnotpowerup,
contactyourlocaldealerorTopconTechnicalSupportforadvice.