Product Manual

Field System Setup
SettingUptheRoverReceiver
56
P/N:7010‐1004
Setting Up the Rover Receiver
1. Ifneeded,attachthequickdisconnecttothe
bipod/rangepole.

2. Attachthereceivertothequickdisconnect.
Makesurethereceiverlocksintoplac e.
3. Ifyouarenotusingafixedheightroverpole,
measuretheheightofthereceiverfromthe
ground.See
“MeasuringAntennaHeight”on
page57.
4. Attachtheantennatotheantennaconnector.
5. Pressthepowerbuttontoturnonthe
receiver.Theintegratedwirelessdeviceinthe
receiverturnsonwhenthereceiveris
powered.
6. ViewtheLEDdisplaypanelforthereceiver’s
currentstatus.Seealso
“DisplayPanel
Operations”onpage19.
Useabipodduringpost‐process
surveystoensurethe
antenna/receiverdoesnot
moveduringdatalogging.
Lock
GR-5 Recevier
5/8 inch Screw
Quick Disconnect (Optional)