Product Manual

FieldSystemSetup
55
P/N:7010‐1004
• • • • • •
Field System Setup
Thischapterdescribesthefieldsetupofyournew receiver,soitisreadyforuseasaBase,network,RTKRover,orstaticdata
collector.
Setting Up the Base Receiver
1. Installaheavy‐dutytripod(p/n:22‐050501‐01)
overaknownpoint.Youdonot needauniversal
tribrachandtribrachadapterwhenworkingwith
thistripod.

2. Attachtheantennatothemodemantenna
connector.
3. Levelthetripodandtightenthescrews.
4. Attachanyotheraccessoriesasneeded,suchasa
back‐uppowersupply.
5. Measuretheheightofthereceiverfromthe
groundusingthetapemeasure.See
“Measuring
AntennaHeight”onpage57.
6. ViewtheLEDdisplaypanelforthereceiver’s
currentstatus.Seealso
“DisplayPanelOperations”
onpage19.
GR-5 Receiver
Heavy Duty Tripod