Product Manual

Managing Power
PoweringtheReceiver
38
P/N:7010‐1004
2. InsertfourAAbatteriesasshownontheinsideoftheshell(andinFigure15below) .
• Thebatteriesontheleftlaywiththepositiveendtowardsthebottomoftheshe ll.
• Thebatteriesontherightlaywiththepositiveendtowardsthetopoftheshell.
3. Replacethebackcoveroftheshell.
Figure15:RemoveCoverandInsertAABatteries
4. InserttheAAbatteryshellintothebatterycompartmentofthereceiverasshowninFigure13onpage4‐36.
Surveying While Charging
TheusercanexecuteanykindofsurveyingwhilechargingtheinternalbatteriesattachedtotheGR‐5withoutdegradation
ofperformance.
- +
- +
+ -
+ -
Whilecharging,makesuretheairtemperatureisbetween+32
o
F(0
o
C)and+113
o
F(+45
o
C).Thisis
importanttopreventseriousdamagetothebatteries,thereceiverorinjurytopersons.