Product Manual

Managing Power
PoweringtheReceiver
36
P/N:7010‐1004
Leaving the Batteries on Charge
Thebatteriescanbesafelyleftinthereceiverorthechargingcradleoncechargingiscomplete.Doingsowi llnot
overchargeordamagethebatteries.
Thebatteriescanalsobeattached/detachedto/fromthereceiverorchargingcradleatanytimewithoutharmingthe
batteries,thereceiver,orthecrad le.Whenreturningthebatteriestothereceiverorcradle,chargingisautomatically
resumed.
Attaching the Batteries
ToattachthebatteriestotheGR‐5(Figure13):
1. Withthe batteryslightlytipped,placethebottom
ofthebatteryintothebottomofthebattery
compartment.
2. Gentlypushthetopofthebatteryintothebattery
compartmentuntilitsnapsintoplace.Makesure
thattheclipatthetopofthebatterycompletely
snapsintoplace.
Figure13:InsertingtheGR‐5Batteries