Product Manual

Managing Power
PoweringtheReceiver
35
P/N:7010‐1004
Tochargethebatteriesusing thepowersupplyunit:
1. Plugthereceiver ‐to‐SAEpowercableintothe
receiver’spowerinputport.
2. Connectthereceiver‐to‐SAEpowercableandthe
powersupply‐to‐outletcabletotheACadapter.
3. Plugthepowersupply‐to‐outletcableintoan
availableoutlet.Thebatteriesarefullycharged
afterapproximately6hours.
Tochargethebatteriesusing thechargingcradle:
1. Removethebatteriesfromthereceiverandinsert
themintothechargingcradle.
2. Connectthepowercabletothepowersupplyunit.
3. ConnecttheSAEconnectorsonthepoweradapter
cableandpowersupplyunit.
4. Connectthepoweradaptercabletooneofthe
portsonthechargingcradle(eitherportwillcharge
both/eitherbattery).
5. Plugthepowersupplytoanavailableoutlet.The
batteriesarefullychargedafterapproximately6
hours.
Figure12:ChargingBatteries
To grounded outlet