Product Manual

Managing Power
PoweringtheReceiver
31
P/N:7010‐1004
Detachable External Batteries
Eachdetachablebatteryprovidesbetween5and10hoursofoperation,dependingonthereceivermode.
Tocheckthestatusofthedetachablebatteries,viewtheBATTLEDorcheckthestatususingavailableTopconsoftware.
Charging the Batteries
Thebatteriesareshippedfromthefactorywithoutpower.Fullychargethebatteriesbeforesurveying.Youcanusethe
powersupplyunitorthebatterychargingcradletochargethebatteries.
Power Supply Unit
Thepowersupplyunit(p/n22‐034101‐01)chargestheexternalbatterieswhenconnectedtoagroundedoutlet.Thisunit
convertsthealternatingcurrent(AC)normallysuppliedfromanelectricaloutlettoadirectcurrent(DC)usedtocharge
thebatteriesand/orpowerthereceiver.
Youcanconnectthepowersupplyunittothechargingcradleordirectlytothereceiver.See“PowerSupplyUnit”on
page32.Thepowersupplyhasthefollowingspeci f ications:
• inputvoltage–between100and24 0VAC
• frequencyofinputpower–between50Hzand60Hz
• outputvoltage–12VDC@2.5A(30W)
Thepowersupplyunitisdesignedforindooruseonly.Donotuseinadamporawetenvironment.
Donotexposethepowersupplytorainorsnow.Itshouldonlybeusedforchargingthebatteries.
Donotuseasapowersourceduringsurveying.