User guide

7
Ultra SR1250 Line settings
ENGLISH
•‘ENTER NAME’ appears in the display. Enter the name using the
alphanumeric keys.
3. Press and edit if necessary the telephone number.
4. Press to store the entry in the phonebook or press
ESC
to cancel without saving the entry.
5.3 Finding and calling a number in the phone book
1. Press .
2. Enter the initial letters of the name using the alphanumeric keys.
• The first name in the list with these letters appears in the display.
3. Press or repeatedly
to scroll through the other numbers
in the phone book.
4. Call the subscriber found: the desired number is highlighted. Press
.
6 Line settings
6.1 Set country
There are various country depending settings and by setting the country
these parameters are set correspondingly. Each parameter can be set
separately also.
1. Press .
2. Press or repeatedly, select ‘LINE SETTINGS’.
3. Press to confirm.
4. Press or repeatedly, select ‘COUNTRY’
5. Press to confirm.
6. Press or repeatedly to select the country and press
to confirm.
7. Press again to confirm.
7 Additional handsets and base stations
Up to 5 handsets can be registered to one base station. Additional handset
must be registered to the base unit before use. Handsets of a bundled
model are already registered to the base.
7.1 Registering an additional handset
Hold down the paging key on the base station for more than 5
seconds until the message counter display on the base station begins
to flash with ‘ ’-‘ ’.
Registration mode on the base station is now activated for approx. 3
minutes. You must perform the following steps to register a handset:
1. Press .
2. Press or repeatedly, select ‘REGISTRATION’.
3. Press to confirm.
4. Press or repeatedly, select ‘REGISTER’.
5. Press to confirm.
6. Enter the base station PIN code (system PIN, default 0000) and press
.
• The handset will now search for the base station and register when it
has found it. Following successful registration, the display shows
standby mode and the handset name and number.
8 Answering machine
8.1 LED display
The LED display on the base indicates how many messages you have
received. When there are new messages, the LED display on the base will
blink and only indicate the amount of new messages. After you have
listened to the new messages, the total number of stored messages will be
displayed. If the answering machine is switched off, the LED display
does not light up.
If the answering mode is set to answering only, ‘[A]’ will be shown on the
display. When the answering machine answers a call or when it’s
controlled by the handset ‘[--]’ will blink on the display.
17
17
3
16
4
15
14
17
4
15
17
4
15
17
4 15
17
17
You can only register handsets of the Ultra range (like the Ultra
S1200C)!
This is only necessary if you have de-registered a handset or
bought a new separate handset. You don’t have to register
handsets of a bundle!
22
23
17
4
15
17
4 15
17
17
23
23
HL_Ultra SR1250 eco D73.book Page 7 Wednesday, July 28, 2010 12:39 PM