User Guide U8003010/3
1. DESCRIPTION (see front cover) 1. 2. 3. 4. 5. 6. 7. Microphone Monitor button Talk button Call button Transmission LED Ear/mic/charger Antenna 8. LCD display 9. Up/Down button 10.Menu/Lock button 11. On/Off button 12.Scan button 13.Speaker 2. INSTALLATION 1 2 3 4 2.1. Removing/Installing the Belt Clip 1. To remove the clip from the unit, push up on the belt clip (2) while pulling the clip tab (1). 2. When re-installing the belt clip, a click indicates the BeltClip is locked into position. 2.2.
. LCD SCREEN A B C I D VX SC H G F E a. RX icon. Displayed when receiving a signal. b. TX icon. Displayed when transmitting a signal. c. Displays the current VOLUME LEVEL. d. CTCSS code. Changes from 1 to 38 as selected by user. e. Displayed during the CHANNEL SCAN mode. f. Displays during the VOX mode. g. Button lock symbol h. The current battery level charge. i. Channel number. Changes from 1-8 as selected by user. 4. GETTING STARTED 4.1.
5. OPERATION 5.1. Changing Channels The PMRS has 8 available channels. CHAN. No. FREQ. (MHz) 446.00625 446.01875 446.03125 446.04375 446.05625 446.06875 446.08125 446.09375 1 2 3 4 5 6 7 8 To change channels: 1. Press the MENU button ( ) once, the current channel number flashes on the LCD Screen. 2. Press the UP ( ) or DOWN button ( ) to change the channel. 3.
.4. Button Lock Press and hold the MENU button ( ) for 5 seconds to activate or deactivate the BUTTON LOCK mode. The BUTTON LOCK icon is displayed on the LCD Screen.Press and hold the MENU button ( ) again to deactivate BUTTON LOCK 5.5. VOX Selection The PMRS is capable of voice activated (VOX) transmission. In VOX mode, the radio will transmit a signal when it is activated by your voice or other sound around you.
5.8. Using rechargeable batteries. Important: Do not charge this unit using an AC/DC ADAPTER with regular “AAA” alkaline batteries installed. Only use the optional AC/DC ADAPTER with “AAA” rechargeable batteries (not included). To use the PMR with an AC/DC ADAPTER and rechargeable batteries do the following: 1. Insert four (4) “AAA” rechargeable batteries (not included). 2.
. SAFETY INSTRUCTIONS 7.1. Damage antenna. Do not use any communicator that has a damaged Antenna. If a damaged antenna comes in contact with the skin, a minor burn may result. 7.2. Batteries. As batteries can cause property damage and/or bodily injury such as burns if conductive material such as jewelry, keys or beaded chains touches exposed terminals. The material may complete an electrical circuit (short circuit) and become quite hot.
7.6. Electromagnetic Interference/Compatibility: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility. Turn your unit OFF in any facilities where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy. Turn your unit OFF when on board an aircraft when instructed to do so.
