User guide

4 Sologic T101

Sologic T101 - V1

• Do not operate the equipment if the telephone cable or the equipment itself is

damaged.

• If the equipment is dropped, it must be checked by a professional before

further use.

• Dangerous voltages are present inside the equipment. Never open the housing

or insert objects through the ventilation holes.

• Do not allow liquids to get into the equipment. In case of emergency, pull out

the plug from the socket.

• Similarly, if a fault develops during use or before you start to clean the

equipment, pull the plug out of the socket.

• Do not touch plug contacts with sharp or metal objects.

• Do not carry out any modifications or repairs to the equipment yourself. Have

repairs done to the equipment or the mains cable only by a specialist service

centre. Unsatisfactory repairs can lead to considerable danger for the user.

• Children frequently underestimate the dangers associated with electrical

equipment. Therefore you must never leave children unsupervised in the

vicinity of electrical equipment.

• The equipment is not to be used in a damp room (e.g. bathrooms) or rooms

where there is a lot of dust.

• Equipment connected to the telephone line during a thunderstorm can be

damaged by lightning. Therefore you should pull the plug out of the main socket

during a storm.

5 Buttons/LED

1. Handset

2. Line cord connector

3. Ringer switch (on/off)

4. Handset volume switch

5. Keypad

6. Memory button M1-M2-M3

7. In use LED

8. Redial/Pause button

9. Flash button R

10. Program button

11. Handset curl cord connector

6 Installing the line cord

For installation, do the following:

• Put the telephone on a flat

surface.

• Plug one end of the line cord into the telephone wall outlet and the other end

into the Line connector on the backside of the telephone (2).

M1 M2 M3