User guide

ManualsBrandsTopcom ManualsTelephonesSologic B931

Sologic B931 23

Sologic B931

ENGLISH

The default settings are:

Dial Mode: Tone

Flash time: Flash-1

PIN Code: 0000

13 Additional handsets and bases

You can subscribe up to 5 handsets on one base. Each handset can register to 4 base

stations and the user can select which base he wants to use. By default the handset 1 is

registered to the base unit 1.

13.1 Adding a new handset

Keep the paging key on the base unit pressed for 5 seconds. The base unit will stay

in subscribing mode for 3 minutes. Do the following to subscribe the handset:

• Press the left ‘Menu’ key.

• Press the up or down key

/ repeatedly until ‘Registration’ is selected.

•Press ‘Select’ to confirm.

• Press the up or down key

/ to select a base (1-4).

• The handset will now search for a base end when it’s found the system PIN code (base

PIN code; default=’0000’) is asked.

• Enter the PIN code and and press ‘Select’.

• The standby screen will appear when successfully registered and handset name and

number will be shown.

13.2 Removing a handset

It is possible to cancel subscription of a handset to a base. You should do this if a handset is

damaged and has to be replaced by a new one.

• Press the left ‘Menu’ key.

• Press the up or down key

/ repeatedly until ‘BS Settings’ is selected.

•Press ‘Select’ to confirm.

• Press the up or down key

/ repeatedly until ‘Terminate HS’ is selected.

•Press ‘Select’ to confirm.

• Enter the PIN code and press ‘OK’.

• Use the up or down key

/ to select the handset. If you select the current

handset or a non-existing handset, a warning tone will be heard.

•Press ‘Select’ to confirm your selection or press ‘Back’ to leave the menu.

This is only needed when you have deregistered a handset or when

you bought a new one.

Each handset can be subscribed to 4 different DECT base units. Each

base unit is assigned a number from ‘1’ to ‘4’ in the handset. When

you subscribe a new handset, you can assign a base unit number. It

is best to use ‘1’.

You can only cancel subscription of another handset, not the

handset you are using to do the remove procedure.