Operation Manual
6 TOPCOM Multi Steamer 401
TOPCOM Multi Steamer 401
5.3 Warming a baby bottle using the cook function
• Remove every accessory from the main unit, including the steamer bowl .
• Use the enclosed measuring cup to measure 150ml water.
• Pour the 150ml water into the water reservoir .
• Position the steamer cover without
the removable steamer cover lid on
the steamer bowl.
• Put the baby bottle with milk into the gap on top of the steamer cover .
• Press the On/Off button . The display will indicate the temperature.
• Press the Warm up button to start the warming process.
• Press the temperature increase button to set the temperature to minimum
70°C.
• The water will warm up to 70°C and this will heat the baby bottle.
Changing the cook temperature will influence the warming time. The
higher the temperature, the quicker the bottle will warm.
• After about 10 minutes, the milk in the baby bottle warmer will be ready.
• Press the Clear button .
• Remove the bottle from the warmer using the enclosed bottle pincers.
Always check the food temperature by testing some on the back of your hand.
• Disconnect the power after use.
5.4 Keep warm function
Once you have warmed your baby bottle or food, you can keep it warm at 40°C. (40°C)
• Make sure that there is 150ml water in the water reservoir .
• Position the steamer cover without
the removable steamer cover lid on the steamer bowl.
• Put the baby bottle with milk into the gap on top of the steamer cover .
• Press the On/Off button . The display will indicate the temperature.
• Press the Keep Warm button . This will set the temperature to 40°C and keep the baby bottle
temperature on the right temperature until the bottle is needed.
• Disconnect the power after use.
Do not keep the bottle longer warm than 1 hour.
Always check the food temperature by testing some on the back of your hand.
The keep warm function can also be used for keeping baby food at 40°C.
6 Technical data
7 Cleaning
• Disconnect the device and allow it to cool down.
• Clean it with a soft cloth or slightly damp sponge.
• Never allow that water or any other liquid enters the device or accessories.
• Never use abrasive cleaners, brushes, gasoline, kerosene, glass polish or paint thinner to clean.
• The plastic components are not suitable for use in a dishwasher.
Power supply
Rated power
Temperature
220-240 V/AC / 50 Hz
300 W
37°C - 100°C (+/- 5°C)
Wa
r
m
u
p
S
ter
e
l
i
z
e
C
o
o
k
K
e
e
p
w
arm
150ml
120ml
90ml
60
ml
30ml
3
2
4 5
4
13
14
9
12
2
4
5
4
13
15










