User guide

KS-4250

ENGLISH

7.2 Product layout

See Figure “A” on the fold-out page.

8Initial use

8.1 Before setting up

• Make sure your Wi-Fi router is turned on and it can connect to the Internet.

• Download “Easy iCAM” App from the Apple App Store or Android Market (Google Play).

8.2 Connecting the KS-4250 to the AC mains

See figure “B” on the fold-out page.

• Insert the small plug of the AC mains adapter in the mains power connector of the baby unit

and plug the AC mains adapter into a mains connector (100~240 V - 50/60 Hz).

• Slide the Power ON/OFF switch to the ON position. The LED on the camera will glow

orange and then change to red.

Note: When you power the camera on, it takes around 40 to 60 seconds for initial setup.

9 Installing the KS-4250

9.1 Fine tuning

• Place the camera in a convenient location, point the lens of the camera to the observation

area.

• Adjust the angle by rotation the camera.

1 Light sensor

2 Microphone

3 Camera lens

4 Infrared LEDs

5 Antenna

6 Power/Status LED

7 Power adapter plug

8 Reset to factory default button

9 Power ON/OFF switch

CAUTION

• The mains connector must be within easy reach so you can quickly unplug the power

cable in an emergency.

• Use only the supplied AC mains adapter (6 V DC / 800 mA).

CAUTION

Do not place the camera and wires within the baby’s reach!

Fix the camera at least 1 meter away from the baby.

KS-4250 D106.book Page 5 Monday, November 18, 2013 9:24 AM