User guide

7
Babytalker 3100
ENGLISH
– The sounds picked up by the microphone are reproduced by the parent unit.
– The volume of the reproduced sound is indicated by the volume LEDs at the top of the parent unit.
The higher the volume, the more LEDs are on.
– An audible tone is generated when the maximum volume is reached.
– If no connection is established, a double beep tone is generated as a warning and the Link LED blinks.
– Reduce the distance between the parent and baby units until a new connection is established.
9.3 Finding the Parent Unit (Paging function)
– Press the Paging button on the baby unit and hold it pressed for at least 2 seconds before releasing
it.
– In response, the parent unit will emit a high-pitched tone for 30 seconds. This makes it easier to find the
parent unit.
– Briefly press the On /Off switch on the parent unit to switch off the tone.
9.4 NEMo Switch Setting
The Babytalker 3100 is based on the unique NEMo technology, which lets parents set
the radiated power of the equipment. See “6.4 No emission mode (NEMo)”.
If you want to have a quicker response you can turn the NEMo function OFF. By turn
OFF the NEMo function you will have always communication between the baby-and parent unit (even when there
is no noise).
To turn it ON/OFF:
– Turn off both parent- and baby unit.
– Slide the switch to ON or OFF at the back of baby unit.
– Power up both units (no need to concern which unit first)
9.5 Setting the Reproduction Volume of the Parent Unit
There are six volume settings.
– Press button to increase the volume.
– Press button to decrease the volume.
When you set the volume at the lowest setting the speaker will be turned off. Only the volume LED’s will lit when
noise is captured by the baby unit.
9.6 Switching the Night Light On and Off
– You can switch the night light on and off directly on the baby unit by pressing button .
10 Cleaning and Maintenance
This section contains important instructions for cleaning and maintaining the equipment.
Follow these instructions to ensure trouble-free use and prevent damage to the equipment due to improper
maintenance.
10.1 Safety Instructions
• If NEMo is turned ON and the baby unit picks up noise, it will take
about 3 seconds before the parent unit will turn on the speaker.
• If volume is turned off and maximum volume is captures by the baby unit, you will hear a
short beep to indicate this.
DANGER
Risk of fatal injury due to electric shock!
• Before cleaning the equipment, switch it off and unplug the power cable from the mains receptacle.
CAUTION
Risk due to leaking battery fluid
Fluid from leaking batteries (regular or rechargeable) can cause injuries (skin irritation) or damage to the
equipment. Wear safety gloves.
CAUTION
6
11
13
5
15
NEMO
OFF
ON
10
26
28
11
3