V 1.1 USER GUIDE FIDELITY 1150 The features described in this manual are published with reservation to modifications. http://www.topcom.net/support/cedeclarations.php This product is in compliance with the essential requirements and other relevant provisions of the R&TTE directive 1999/5/EC. The Declaration of conformity can be found on : Important To use ‘Caller ID’ (display caller), this service has to be activated on your phone line.
1 22 24 19 20 21 23 25 31 1 26 30 27 18 2 29 17 3 16 28 4 5 6 7 15 14 13 10 11 12 8 9 Before Initial use Intended Purpose Caller ID Connection 2 In any case, use conditions for which the product has been created should be respected as well as avoid its use in public or private networks with technical requirements clearly different to those established in the EU.
Topcom Fidelity 1150 Buttons 7 (See picture 1 and 2 on folded cover page) 1. Hook Switch 2. Direct Memory buttons (M1-M3) 3. LCD display 4. Phonebook button ‘ ‘ 5. Menu botton ‘ ‘ 6. Call List button 7. Up button ‘ ’ / OGM button 8. Down button ‘ ’ / Memo button 9. TAD On LED 10. Stop / 11. Call back button ‘ ’ 12. Flash button ’R’ 13. Redial button / Pauze button ‘P’ 14. Mute button ‘ ’ 15. Alphanumerical keypad 16. Volume Down button ‘ ’ 17. Handsfree LED 18. Handsfree button 19. Ringer LED 20.
Topcom Fidelity 1150 7.4 Setting the date and time When you have a subscription to the Caller ID service and your telephone provider sends the date and time together with the telephone number, the phone’s clock will be set automatically. The year must always be set manually. To record the date and time stamp to the recorded message on the answering machine, the time must be set. Confirm Select the desired ring tone (1-5) Confirm the ring tone ESC 2 X To leave the menu 8.
Topcom Fidelity 1150 Press the volume button to change the speaker volume Enter the dial prefix 9.2 OR Pick up the handset Enter the telephone number Dialing mode (Tone/Pulse) Enter the menu ENGLISH To enter a Pause, press the pause button ‘P’ Confirm ESC 2 X To leave the menu The call duration timer is shown on the 2e line of the display [mm:ss]. Select ‘PABX setting’ Enter the menu Select ‘Dialing mode’ 10.
Topcom Fidelity 1150 11.2.1 Scrolling through the Call List Press the New Message button 12 Phone Book The Fidelity 1150 can store 50 telephone numbers with name. To scroll through the call list 12.1 11.2.2 Calling a number from the Call List Press the New Message button Scroll through the call list until you have found the desired telephone number The phone number will be dialled automatically 11.2.
Topcom Fidelity 1150 Adding a number to the Phone Book To confirm Press the delete button briefly to delete a wrongly entered number. Enter Phonebook Menu 1X ENGLISH 12.2 Modify the telephone number ‘New’ To confirm To confirm Enter the telephone number Modify the name by using the alphanumerical key pad (see chapter 12.1) Press the delete button briefly to delete a wrongly entered number. To confirm Enter the name by using the alphanumerical key pad (see chapter 12.
Topcom Fidelity 1150 13 Memory numbers Modify the telephone number if necessary You can program 3 Direct numbers (max 24 numbers and 16 characters). These memory numbers can be dialled by pressing M1-M3. 13.1 M? Press the delete button briefly to delete a wrong numbers To confirm Adding a number to a Direct Memory Modify the name by using the alphanumerical key pad (see chapter 12.1) Press the desired Direct Memory (M1-M3).
If the OGM is less than 3 seconds, the recording is not valid. To stop the recording. The message will be playbacked To replay the recorded OGM 14.4 To delete an OGM T/S is ‘Toll Saver’. The TAD will answer a call after 4 rings if there are no new messages, and after 2 rings if there are new messages. If there are no new messages and you call your machine to check your messages remotely, you can hang up after the 2nd ring.
Topcom Fidelity 1150 14.6 Incoming messages 14.10 Deleting all messages After the set number of rings the TAD will answer the call, the caller will hear your outgoing message (OGM).If OGM1 is selected, he can record a message (max 2 minutes) after the beep. As soon as you have new messages the number of new messages will be displayed. The recording will be interrupted when it detect silence for 6 seconds or when you pick up the handset. 14.
Topcom Fidelity 1150 If the answering machine is OFF, the user can wake-up the device remotely by dialing the number and wait for 12 rings. The machine will answer with OGM2. Enter the remote code and follow the instructions explained in chapter 14.11. 14.13 Memory Full There are 2 kinds of Memory Full situations. 1. During Memo/OGM/ICM recording, the memory is full. 2. The memory is full and somebody is trying to record a message. The unit shall play a message indicating the memory is full.
SERVICE RETURN CARD - RÜCKSENDEKARTE CARTE DE RETOUR SERVICE - RETOURFICHE RETURN WITH YOUR DEFECT PRODUCT Name/Vorname/Prénom/Naam: Surname/Familienname/Nom/Familienaam: Street/Straße/Rue/Straat: Nr./N°: Box/Postfach/Boîte/Postbus: Location/Ort./Lieu/Plaats: Post code/Postleitzahl/Code Postal/Postcode: Country/Land/Pays/Land: Tel./Tél.
FIDELITY 1150 visit our website www.topcom.
