User guide

TOPCOM Babytalker 1010

ENGLISH

21.4 VOX Selection

The PMR is capable of voice activated (VOX) transmission. In VOX mode, the radio will

transmit a signal when it is activated by your voice or other sound around you. VOX operation

is not recommended If you plan to use your radio in a noisy or windy environment.

21.5 Call Tones

A call tone alerts others that you want to talk.

Press the button briefly. The call tone will be transmitted for 3 seconds on the set

channel.

21.6 Monitor

You can use the MONITOR feature to check for weaker signals in the current channel.

• Press and hold the - button and the - button for simultaneous for 3

seconds to activate channel monitoring.

• Press the - button to stop monitoring.

21.7 Channel Scan

CHANNEL SCAN performs searches for active signals in an endless loop from channel 1 to

8 including

• Press the - button 3 times, the current VOX setting

flashes on the display and the VOX icon is displayed.

• Press the - button to turn the VOX feature ON press -

button again to select the VOX sensitivity level which

displayed. Press the - button until OF appears on the

display, to turn VOX OFF.

• Press the - button to confirm and return to stand-by

mode.

• Press and hold the - button . Press the - button

briefly to start scanning.

• Release the buttons.

• When an active signal (one of 8 channels) is detected,

CHANNEL SCAN pauses and you will hear the active signal.

• Press the - button to communicate through the active

signal channel.

• Press the - button to deactivate channel scan.

• Press the - button or the - button to bypass the

current channel and continue to search for another active

channel

PTT