User guide

TOPCOM Babytalker 1010

ENGLISH

17 Adjusting the Parent Unit Speaker Volume

18 Beep tone ON/OFF

The Baby Unit can transmit automatically a 1 khz beep tone every 30 seconds when it is in

the listening mode. This function can be used when you need to be sure that the babytalker

is operational at all time.

19 Automatic monitor ON/OFF

The Baby Unit can automatically open the microphone every 5 minutes and transmit the

room activity for 5 seconds.

20 Alert Tone ON/OFF

The Baby Unit will send out an alert tone when you activate the VOX function. After the alert

tone, it will transmit the detected voice signal.

• Press the - button in stand-by-mode to increase the

speaker volume. The volume level is displayed.

• Press the - button to decrease the speaker volume.

• Press the - button 3 times.

• Press the - button to enable (ON) or the - button

to disable (OF) this function.

• Press the - button to confirm the selection.

• Press the - button 4 times.

• Press the - button to enable (ON) or the - button

to disable (OF) this function.

• Press the - button to confirm the selection.

• Press the - button 5 times.

• Press the - button to enable (ON) or the - button

to disable (OF) this function.

• Press the - button to confirm the selection.