User guide

10 TOPCOM Babytalker 1010
TOPCOM Babytalker 1010
15 Setting the Channel Memory
To have communication between the Baby Unit and the Parent unit they need to be set both
on the same channel memory. 15 Channel Memories are available (See chapter 23).
15.1 Baby unit
15.2 Parent unit
16 Adjusting the Baby Unit VOX sensitivity
The baby unit transmission is activated by the voice of the baby or by another sound in the
environment (VOX).
The VOX sensitivity can be adjusted by turning the VOX sensitivity switch ;
– Up = Highest sensitivity position
– Down = Lowest sensitivity position
• Press the - button twice, the current channel memory
flashes on the display.
• Press the - button or the - button to change the
channel memory.
To disactivate the Channel Memory function, select OF
• The unit will return to standby if no button is pressed within 5
seconds.
• Press the - button twice, the current channel memory
flashes on the display.
• Press the - button or the - button to change the
channel memory.
To disactivate the Channel Memory function, select OF
• Press the - button to confirm and return to stand-by
mode.
Any PMR set on the corresponding channel can receive and listen to
the conversation.
6
8
4
15
19
18
PTT
20
1
Try the VOX sensitivity and excercise sufficiently before using
the Babytalker 1010.