User guide

42
Troubleshooting
Taking an external call during an internal communication
When you are on intercom with another handset, you can still pick up outside calls.
To take an incoming call:
13 Troubleshooting
5 Press the on-hook key to hang up or put the handset back on the
base.
1
Press the on-hook key. The internal communication is now interrupted.
2 Press the off-hook key. You are now in communication with the
outside caller.
Symptom Possible cause Solution
No display Batteries uncharged Check the position of the batteries
Recharge the batteries
Handset turned OFF Turn ON the handset
No tone Telephone cord badly
connected
Check the telephone cord
connection
The line is occupied by
another handset
Wait until the other handset hangs
up
The icon flashes Handset out of range Bring the handset closer to the
base
The base has no power
supply
Check the mains connection to the
base
The handset is not registered
on the base
Register the handset on the base
Base or handset do not
ring
The ringing volume is off or
low
Adjust the ringing volume
Not possible to transfer a
call on PABX
The Flash Time is too short
or too long
Change the Flash Time
Telephone does not react
to pressing the keys
Manipulation error Remove the batteries and put
them back in place