User Manual

Prepare：make sure that the hair dryer is powered on.
Press and hold the back up button 3 seconds，then l
you will hear a beep, now you can release your hand,
Now press the OFF button.
When the indicator light changes from flashing blue
to stable blue or off, it is complete.
If the remote controller does not work,the back up button can be used to start the hair dryer in
Double click back up button to start , it goes directly into Hot Mode, then click, it goes into Cool Mode, next click ,it will be off.
7
【Hot】 【Cool】 【Power off】
REMOTE CONTROLLER RE-CONNECT
The blue light is flashing
THE INSTRUCTIONS OF REMOTE CONTROLLER
Please replace the battery in the following ways:
Note:
Use a screwdriver to turn counterclockwise to open
Remove the remote control battery and
Screw in the rear cover clockwise.
ABNORMAL STATUS OPERATION GUIDE
INSTRUCTION FOR BACK UP BUTTON
1.Back up button is on a red light and the remote controller has electricity, but can not control the hair dryer.
Please re-connect the remote controller if the product is under following situation:
O
p
e
n
Scre
w in
CR 2032 button battery
please note “+”is upward
When the battery is replaced, if the remote controller can not control the hair dryer, please re-connect with the main body.
please note "+" is upward.
Press and
emergancy.
the blue light is flashing.
hold for 3
the rear cover.
replace a new one. When installing the battery,
seconds
The blue light is always on or off.
the pairing is completed.
BATTERY REPLACEMENT