Quick start Guide
Star Effects
For more Star Effects tutorials and resources please visit: http://www.topazlabs.com/tutorials/stareffects
Workow
9.Click on the Additional Adjustments tab to open it and reveal the adjustment sliders. The Additional Adjustment allows you to
add some neat nishing eects to your star eects.
10. We will slighly lower the Glow and Ring are settings. However, you do not have to make any adjustments here.
Secondary Points - Allows you to add secondary spikes to your star eect.
A higher value produces more spikes. A value of 0 disables this feature.
Glow - Creates a soft glow from the center point of the star eect.
A higher value increases the radius of the glow, while a lower value
lowers the radius of the glow eect.
Ring Flare - Allows you to create a circular are around the spikes/points
of your star eects. A higher value increases the strength of the are.
A value of 0 disables this eect.
Be sure to use the Before / After tabs at the top of the interface (or your spacebar shortcut key) to view the before and after
preview of your image.
Once you are happy with your adjustments click OK to process your changes and save your image back to Photoshop. And you’re
all set!