User's Guide

www.topvme.com
6
CARD READER
5-2. Metal bracket installation
Installation method:
1. Lock the self-tapping screws (a) into the bracket and secure the CMS100, do not
loosen the screws. (top left)
2. Place the carriage screw (b) into the CMS100 and look down with the nut (c) so that
it is not loose. (top right)
3. Drill holes in the desired position according to the stenal.
4. Connect the required wire.
5. Use screws (b)to secure the metal bracket to the machine and lock with nuts (c) .
(a)x4
(b)x2
(b)x4
(c)x2
(c)x4
Sheet metal