User's Manual

THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO

VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE

PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL.

This monitor meets the Power Management standards as set by the Video

Electronics Standards Association (VESA) and/or the United States

Environmental Protection Agency (EPA) and The Swedish Confederation

Employees ( NUTEK ). This feature is designed to conserve electrical

energy by reducing power consumption when there is no video input signal

present. When there is no video input signal this monitor, following a time-

out period, will automatically switch to an OFF mode. This reduces the

monitor's internal power supply consumption. After the video input signal is

restored, full power is restored and the display is automatically redrawn. The

appearance is similar to a "Screen Saver" feature except the display is

completely off. The display is restored by pressing a key on the keyboard, or

clicking the mouse.

USING THE RIGHT POWER CORD :

The accessory power cord for the Northern American region is the wallet

plug with NEMA 5-15 style and is UL listed and CSA labeled. The voltage

rating for the power cord shall be 125 volts AC.

Supplied with units intended for connection to power outlet of personal

computer: Please use a cord set consisting of a minimum No. 18 AWG, type

SJT or SVT three conductors flexible cord. One end terminates with a

grounding type attachment plug, rated 10A, 250V, CEE-22 male

configuration. The other end terminates with a molded-on type connector

body, rated 10A, 250V, having standard CEE-22 female configuration.