User Manual

Insert the front and rear plastic connectors into
the wing, (image J). They are angled to pro-
vide a perfect fit. Make certain you have them
located correctly! The wing can now be
trial-fixed in position onto the fuselage using
the 3 x M4 x 50mm screws provided.
7. Wing Fixings
Please connect the 3-Pin wire leads for Aileron
from the wings to the 3-Pin Y lead provided,
and connect the 2-Pin LED wire leads from the
wing to the 2-Pin Y lead provided. Pay
attention to the polarity of this connection.
Please plug the 3-Pin Aileron Y lead to the
Aileron channel of your receiver. And plug the 2-
Pin LED Y lead to any other channel of the
Receiver except for Aileron, Elevator, Throttle,
Rudder channels. Please pay attention to the
polarity of the connection.
Note: The plastic connectors are
angled for the wing camber.