User Manual

56
E2
Receiver Battery Switch
Battery
Receiver
CH 4 ESC
CH 1 Gear
T6
H3
Receiver
S1
Aileron
Flap
Rudder
Elevator
Elevator
Choke
Throttle
ESC
FUTABA
FUTABA
FUTABA
FUTABA
FUTABA
FUTABA
S1
S1
S1
S1
Tail Wheel
S1
S2
S2
E1
CH 2 Lights
CH 3 Drop Tk
R7006SB
E1
Receiver Battery Switch
H2
H1
E3
H2
SB2/CH 6
SB/CH 5
H1
H3
S.BUS SETUP (Gas/Electric)
(S.Bus Servos)
Futaba S3071HV Servo (FUTM0717) (8 Req)
Servo minimum torque 40ozf-in (2.8 kgf-cm ) (2 Req)
Futaba S3073HV (FUTM0719)
6" to 8" (152mm to 203mm) Servo Extension
Futaba (FUTM4140)/Tactic (TACM2701) (1 Req)
FSH67 Male-to-Male Extension 3" (80mm)
(FUTM4667) (1 Req)
Futaba 16" (406mm) Servo Extension
(FUTM4145) (2 Req)
AEC-33 S.Bus Hub 12" (300mm) (FUTM4195) (3 Req)
AEC34 S.Bus Hub 20" (500mm) (FUTM4198) (2 Req)
AEC32 S.Bus Hub 4" (100mm) (FUTM4197) (2 Req)
6-Way Terminal Box (FUTM4199) (1 Req)
S1
S2
E1
E2
E3
H1
H2
H3
T6
Futaba R7006SB Receiver (FUTL7673) (1 Req)
Optional Futaba CPS-1 Channel Power Switch
(Light Controller) (FUTM0940)
Optional Drop Tank (TOPA1993)
The retracts can be plugged into channel 1 in the
receiver. If using the optional Futaba CPS-1 Channel
Power Switch to control the lights, plug it into
channel 2. Plug the optional drop tank into channel 3.
If powering the plane with an electric motor, plug the
ESC into channel 4.
NOTE: