User Manual

55
D1
S2
S2
H1
S1
Tail Wheel
S1
S1
S1
S1
FUTABA
FUTABA
FUTABA
FUTABA
FUTABA
FUTABA
ESC
Throttle
Choke
Elevator
Elevator
Rudder
Flap
Aileron
S1
D1
D1
T6
Receiver
Battery
Receiver Battery Switch
E1
R6303SB
Port 3/B
Port 2 Lights
Receiver
Port 1 Retracts
S.Bus
E2
H1
H2
S.BUS SETUP (Gas/Electric)
(Non S.Bus Servos)
Servo minimum torque 95ozf-in (6.8 kgf-cm ) (8 Req)
Futaba S3305 (FUTM0045)/Tactic TSX47 (TACM0247)
Servo minimum torque 40ozf-in (2.8 kgf-cm ) (2 Req)
Futaba S3004 (FUTM0004)/Tactic TSX35 (TACM0235)
SBD-1 S.Bus Decoder 16" (400mm)
(FUTM4193) (4 Req)
AEC34 S.Bus Hub 20" (500mm)
(FUTM4198) (2 Req)
AEC33 S.Bus Hub 12" (300mm) (FUTM4195) (1 Req)
6-Way Terminal Box (FUTM4199) (1 Req)
FSH67 Male-to-Male Extension 3" (80mm)
(FUTM4667) (1 Req)
12" to 16" (305mm to 406mm) Servo Extension
Futaba (FUTM4145)/Tactic (TACM2093) (2 Req)
S1
S2
D1
H1
H2
T6
E1
E2
Futaba R6303SB Receiver (FUTL7661) (1 Req)
Futaba R7006SB Receiver (FUTL7673) (1 Req)
Optional Futaba CPS-1 Channel Power Switch
(Light Controller) (FUTM0940)
Optional Drop Tank (TOPA1993)
The retracts can be plugged into channel 1 in the
receiver. If using the optional Futaba CPS-1 Channel
Power Switch to control the lights, plug it into
channel 2. Plug the optional drop tank into channel 3.
OR
The retracts, lights and the drop tank can also be
plugged into a SBD-1 S.Bus decoder. Which is then
plugged into the 6-Way Terminal Box.
NOTE:
Or