User Manual

44
❏
6. Trim the front panel as shown and apply the decals.
Roughen the back of the panel and glue it to the front of the
cockpit, centered at the front of the cockpit  oor.
❏
7. Test  t the plywood instrument panel back in the plastic
instrument panel. Note that it can only be inserted one way.
Attach the instrument panel decal to the front of the plywood
instrument panel back.
❏
8. Glue the plywood instrument panel back into the plastic
instrument panel.
❏
9. Glue the instrument panel into the cockpit.
❏
10. Use sandpaper to rough up the bottom of the seat.
Glue the seat on top of the pedestal. Note: If a pilot will be
installed, test  t it in the seat and the cockpit before gluing
the seat on the pedestal.