TOP DAWG PREMIUM DVR DASH CAM Instruction Manual (PART #: TDDCAM-‐01) Congratulations on your purchase! Please read and understand all instructions before you use your device. If you do not use device properly and follow all instructions, the warranty can be voided.
Using SD card 1) Insert the included 8 GB SD card (up to 32 GB SD Card) into SD Card slot until it clicks into place. 2) To remove SD Card, depress the SD card lightly and the SD Card will eject partially allowing you to remove it. 3) If Dash Cam does not have SD Card in the SD slot, the screen reads “No Card”.
Function Keys Turn on / Turn off / Place in charge only mode (press and hold for approx 3 sec.
Operation Instructions Switching modes 1) Press the “POWER” button momentarily to turn the device “On”. 2) When unit is powered “On” the device defaults into the video setting. This is indicated by observing a “Purple Video Camera” in the upper left hand corner of the display screen. Press the “OK” button to begin recording.
Playback Setting Power on; Depress “MODE” twice button to enter the audio recording mode. Depress “MODE” button 3 times to enter playback mode. Depress “MENU” button to enter the menu setting mode. Then press “MODE” to select: 1) File locking: Lock,/Unlock one, Lock All, Unlock All. This will protect an audio or video file from being deleted.
11) Version Information：It shows the software information. Press “DOWN/UP” button to select, and press “OK” to confirm. Press “MENU” to exit after setting completed. Setting works after restart the device. Operation Get started and loop shooting 1) Press the “ON/OFF” button to enter into video recording mode.
Playback Mode 1) Press the “Mode” button three times to enter into playback mode. The upper left corner of screen will display “ Playing” 2) Press the “ DOWN/UP” button to choose the files 3) Press the ”OK” button to playback the files. 4) Press the “DOWN” button to stop or start again.
Specifications Sensor COMS Lens Wide-‐angle lens 120° Focal Range 12cm ~ infinity Display 2.0-‐inch LTPS TFT LCD AV-‐OUT TV synthetic signals: NTSC Photo 1.
What is Not Covered: − Defects or damage resulting from use of products in other than it normal and customary manner − Defective or damage from misuse, accident, water or neglect − Scratches or cosmetic damage that does not affect operation of the product − Product damage or bodily injury − Contact TD to purchase extended replacement
