355mm Cut-off Machine INSTRUCTION MANUAL £1 Warning: For your personal safety, READ and HINDER STAND before using: SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
a} Do not force the power fool Use the correct power too ior your application. The correct power tog) Wii do he job better and safer at the rate (or which: Ewes designed, b) Dino housemaid power ton! if the switch does not tur it on and off. Any PowerPoint] that cannot be controlled with the switch is dangerous sud must bie repaired ¢} Disconnect the plug front the power source and/or the battery pack Tron the power 1h before making any adjustments, changing accessorizes, of snoring power tools.
Interchange le cutting angle Rose the 2 Hebrews: Song the ice using the Hei key Supplied (flag) 1. Move the rent fens 1 the desired angle using the scale as 8 guide chg) 2. Tighten the 2 hex bolts 10 secure the fence in position. ADJUSTING THE FENCE 1. THe original spacing velveteen the vice dither fence is 178mmn. 2. When cutting wider materiel the rear fierce will need 10 be adjusted to the rear position, When culling narrswiwistkpietes the fence should be positioned Ii the most forward position. 3.
MAINTENANCE WARNING. Ways siren tithe tools switched off and the plug is removed from the power point before making and adjustments or maintenance procedures, POWER CORD MAINTENANCE If the: supply cord needs replacing, the fastidious be carded out by the manufacturer; the manufacturer's agent or an authorized service centime In order to avoid a fidgety hazard CLEANING & INSPECTION .-Keep the tool's gin vents unclogged and cleat all times. . ‘Remove:dust and diff regularly.
