M7 Manual V1.0
Table Of Contents
- Introduction
- Key Points
- Further information
- Safety
- Contents
- M7 Layout
- Quick start
- Charge and discharge settings
- 1. Battery type setting
- 2. The Cells Setting
- 3. Work Mode
- 4. Discharge mode
- 5. Input MaxVoltage
- 6. End voltage setting (TVC)
- 7. Current setting
- 8. NiMh setting (PeakV)
- 9. Cycle setting
- 10. External load setting
- 11. Smart battery setting
- Charge and discharge work
- Accessibility
- 3. Signal output
- 4. ESC test
- 5. Power
- System settings
- Other functions
- Specifications
@ToolkiRC 2021
7
Constant current and constant voltage source
output, customizable 1-28V constant voltage, 1-10A
constant current
Can be adapted to mainstream drone batteries,
automatically activated and charged
Multi-language system, you can upgrade any
language you need
USB 2.1A@5.0V output, rechargeable mobile
devices
The device is simulated as a U disk, and the
upgrade file is copied to realize the product
firmware upgrade