M7 Manual V1.0
Table Of Contents
- Introduction
- Key Points
- Further information
- Safety
- Contents
- M7 Layout
- Quick start
- Charge and discharge settings
- 1. Battery type setting
- 2. The Cells Setting
- 3. Work Mode
- 4. Discharge mode
- 5. Input MaxVoltage
- 6. End voltage setting (TVC)
- 7. Current setting
- 8. NiMh setting (PeakV)
- 9. Cycle setting
- 10. External load setting
- 11. Smart battery setting
- Charge and discharge work
- Accessibility
- 3. Signal output
- 4. ESC test
- 5. Power
- System settings
- Other functions
- Specifications
@ToolkiRC 2021
6
Product description
M7 is a multifunctional tool chain product that
integrates functions such as a balanced charger and
discharger, an electric display, a signal measuring device,
and a signal source.
Can charge and discharge and balance
management of LiPo, LiHV, LiFe Lion 1-6S, NiMh
1-16S, PB 1-10S batteries
Charge current：MAX 10A @MAX200W
Discharge current：Recycle mode Max 10A @200W
External mode Max 10A @200W
Inter mode Max 3A @10W
Lithium battery cut-off voltage can be set (TVC
function)
Can measure battery voltage, battery internal
resistance, lithium battery balance management
Can measure the signal value of PWM/PPM/SBUS,
with an accuracy of 1 microsecond
Can output PWM/PPM/SBUS standard signals with
an accuracy of 1 microsecond