M7 Manual V1.0
Table Of Contents
- Introduction
- Key Points
- Further information
- Safety
- Contents
- M7 Layout
- Quick start
- Charge and discharge settings
- 1. Battery type setting
- 2. The Cells Setting
- 3. Work Mode
- 4. Discharge mode
- 5. Input MaxVoltage
- 6. End voltage setting (TVC)
- 7. Current setting
- 8. NiMh setting (PeakV)
- 9. Cycle setting
- 10. External load setting
- 11. Smart battery setting
- Charge and discharge work
- Accessibility
- 3. Signal output
- 4. ESC test
- 5. Power
- System settings
- Other functions
- Specifications
@ToolkiRC 2021
41
Safe Inter. Temp.: Above this temperature value, the
device will stop the main port output
Safe Exter. Temp.: If the external sensor detects a
temperature higher than this value, the device will stop
the main port output
Safe time: The maximum time of continuous charging
and discharging will stop working if exceeded
Safe capacity: The maximum capacity of continuous
charging and discharging will stop working if exceeded
Continuous work: After charge and discharge, whether
to continue charge and discharge after battery
replacement
Work completed: Whether to stop or trickle charge after
charge done
Battery selection: Option to open and close the battery