M7 Manual V1.0
Table Of Contents
- Introduction
- Key Points
- Further information
- Safety
- Contents
- M7 Layout
- Quick start
- Charge and discharge settings
- 1. Battery type setting
- 2. The Cells Setting
- 3. Work Mode
- 4. Discharge mode
- 5. Input MaxVoltage
- 6. End voltage setting (TVC)
- 7. Current setting
- 8. NiMh setting (PeakV)
- 9. Cycle setting
- 10. External load setting
- 11. Smart battery setting
- Charge and discharge work
- Accessibility
- 3. Signal output
- 4. ESC test
- 5. Power
- System settings
- Other functions
- Specifications
@ToolkiRC 2021
3
Safety
1，M7 allows an input voltage of 7-28V, to ensure that the
power supply voltage is consistent, pay attention to
the positive and negative polarity of the power supply
when connecting.
2，Do not use this product in the environment of heat,
humidity, flammable and explosive gas.
3，Please use this product when someone is guarded to
prevent accidents
4，When not using this product, please unplug the input
power in time.
5 ， When using the charging function, please set a
current that matches the battery. Do not set an
excessive current for charging to avoid damage to the
battery.