M7 Manual V1.0
Table Of Contents
- Introduction
- Key Points
- Further information
- Safety
- Contents
- M7 Layout
- Quick start
- Charge and discharge settings
- 1. Battery type setting
- 2. The Cells Setting
- 3. Work Mode
- 4. Discharge mode
- 5. Input MaxVoltage
- 6. End voltage setting (TVC)
- 7. Current setting
- 8. NiMh setting (PeakV)
- 9. Cycle setting
- 10. External load setting
- 11. Smart battery setting
- Charge and discharge work
- Accessibility
- 3. Signal output
- 4. ESC test
- 5. Power
- System settings
- Other functions
- Specifications
@ToolkiRC 2021
28
Charge done: Indicates the current charging status
5.0W: The current charging power
4.20V/2.00A: end voltage/charge current
===================================
Tips:
1. When charging and discharging work, please
have someone on duty throughout the process
to deal with abnormalities in time.
2. When charging and discharging lithium
batteries, only connecting to the main port will
not perform balance management. Please pay
attention to the balance of the battery. After
connecting to the balance port, it will
automatically balance management.
3. After charging is completed, unplug the
battery and insert a new battery, it will