M7 Manual V1.0
Table Of Contents
- Introduction
- Key Points
- Further information
- Safety
- Contents
- M7 Layout
- Quick start
- Charge and discharge settings
- 1. Battery type setting
- 2. The Cells Setting
- 3. Work Mode
- 4. Discharge mode
- 5. Input MaxVoltage
- 6. End voltage setting (TVC)
- 7. Current setting
- 8. NiMh setting (PeakV)
- 9. Cycle setting
- 10. External load setting
- 11. Smart battery setting
- Charge and discharge work
- Accessibility
- 3. Signal output
- 4. ESC test
- 5. Power
- System settings
- Other functions
- Specifications
@ToolkiRC 2021
27
1mAh: Cumulative capacity
1 4.196V: The first battery voltage
.......
6 4.198V: The voltage of the sixth battery (this
battery is under balance management)
-.---v : No battery connected
Scroll [Scroll Wheel] to switch to the second column,
which is the internal resistance information. As shown
below:
1 64mΩ: Internal resistance of the first battery
......
Scroll [Scroll Wheel] to switch to the third column,
which is the information column. As shown below: