M6D Manual V1.0
Table Of Contents
- Introduction
- Key Points
- Further information
- Safety
- Contents
- M6D Layout
- Quick start
- Charge and discharge settings
- 1，Battery type
- 2，Number of cells
- 3，Mode
- 4，Discharge mode
- 5，Input MaxVoltage
- 6，End voltage（TVC）
- 7，Current setting
- 8，NiMH setting (PeakV)
- 9，Cycle setting
- 10，Power mode setting
- 11，Smart battery
- Charge and discharge work
- System settings
- other functions
- Specification
@ ToolkitRC 2020
36
value, modify the voltage value to be consistent with the
voltmeter value, and achieve calibration. After the
calibration is completed, move the cursor to save, short
press once, the buzzer will beep once, and the save is
successful. Just log out or shut down
6，Fully charged
When the lithium battery is charged, it prompts "Fast
charging has ended". If the battery is not removed,
constant voltage trickle charging will be performed
automatically to make the battery more fully charged.