M6D Manual V1.0
Table Of Contents
- Introduction
- Key Points
- Further information
- Safety
- Contents
- M6D Layout
- Quick start
- Charge and discharge settings
- 1，Battery type
- 2，Number of cells
- 3，Mode
- 4，Discharge mode
- 5，Input MaxVoltage
- 6，End voltage（TVC）
- 7，Current setting
- 8，NiMH setting (PeakV)
- 9，Cycle setting
- 10，Power mode setting
- 11，Smart battery
- Charge and discharge work
- System settings
- other functions
- Specification
@ ToolkitRC 2020
33
Safe Inter. Temp.: Above this temperature value, the
device will stop the main port output.
Safe Exter. Temp.: If the external sensor detects a
temperature higher than this temperature, the device
will stop the main port output.
Safe time: the maximum time of continuous charge and
discharge, beyond which it will stop working.
Safe capacity: the maximum capacity of continuous
charge and discharge, beyond which it will stop working.
Synchronization mode: can be set to open or not. After
opening, the two channels will work synchronously.
Support more power.
Continuous work: When selected the charger will
automatically continue the same charging settings on
the next connected battery. Ensure the next connected
battery requires the same settings as the previous