M6D Manual V1.0
Table Of Contents
- Introduction
- Key Points
- Further information
- Safety
- Contents
- M6D Layout
- Quick start
- Charge and discharge settings
- 1，Battery type
- 2，Number of cells
- 3，Mode
- 4，Discharge mode
- 5，Input MaxVoltage
- 6，End voltage（TVC）
- 7，Current setting
- 8，NiMH setting (PeakV)
- 9，Cycle setting
- 10，Power mode setting
- 11，Smart battery
- Charge and discharge work
- System settings
- other functions
- Specification
@ ToolkitRC 2020
32
Power type: Battery and adapter (PSU). A battery can be
used to recover energy when discharging batteries
(Recycle mode). This mode also provides greater current
draw than internal resistance discharging. Recycle mode
can not be used with a Power Supply Unit (PSU) or any
form of mains power adapter
Max power: the maximum power absorbed from the
input port when charging.
Max current: the maximum current drawn from the input
port during charging.
Voltage range: the allowable input voltage range.
Charging security Set.: Short press to expand settings.
As shown below.