M6D Manual V1.0
Table Of Contents
- Introduction
- Key Points
- Further information
- Safety
- Contents
- M6D Layout
- Quick start
- Charge and discharge settings
- 1，Battery type
- 2，Number of cells
- 3，Mode
- 4，Discharge mode
- 5，Input MaxVoltage
- 6，End voltage（TVC）
- 7，Current setting
- 8，NiMH setting (PeakV)
- 9，Cycle setting
- 10，Power mode setting
- 11，Smart battery
- Charge and discharge work
- System settings
- other functions
- Specification
@ ToolkitRC 2020
31
System settings
After long-pressing [OK] on the main interface, you
can enter the system setting interface when both
channels are idle, as shown below.
Input power settings: Enter the relevant settings of the
power supply. After long-pressing, can select power
supply 1, power supply 2, and power supply 3. Short
press to expand settings. As shown below.