M6D Manual V1.0

@ ToolkitRC 2020
30
attention to the balance of the battery.
Connecting the balance lead is recommended
and will automatically begin balance
management.
3. After the charging is completed, unplug the
battery and connect a new battery, it will
automatically continue to charge and discharge
according to the set mode (if continuous work
mode is selected). When set to a fixed number
of cells, you need to connect the batteries of
the same cells and capacity. When set to
automatically detect the number of battery
cells, please pay attention to whether the
detected number of cells is consistent with the
actual battery.
===================================