M6D Manual V1.0
Table Of Contents
- Introduction
- Key Points
- Further information
- Safety
- Contents
- M6D Layout
- Quick start
- Charge and discharge settings
- 1，Battery type
- 2，Number of cells
- 3，Mode
- 4，Discharge mode
- 5，Input MaxVoltage
- 6，End voltage（TVC）
- 7，Current setting
- 8，NiMH setting (PeakV)
- 9，Cycle setting
- 10，Power mode setting
- 11，Smart battery
- Charge and discharge work
- System settings
- other functions
- Specification
@ ToolkitRC 2020
29
shown below.
Charge done: indicates the current charging status.
Lipo 6S:
the current rechargeable battery type and
battery number.
4.20V/2.00A：
Current battery end voltage and charging
current.
===================================
Tips:
1. When charging and discharging, please directly
supervise throughout the process to deal with
the abnormality in time. Do not leave charging
or discharging batteries unattended.
2. When charging and discharging lithium
batteries, only connecting to the main port will
not perform balance management. Please pay