M6D Manual V1.0
Table Of Contents
- Introduction
- Key Points
- Further information
- Safety
- Contents
- M6D Layout
- Quick start
- Charge and discharge settings
- 1，Battery type
- 2，Number of cells
- 3，Mode
- 4，Discharge mode
- 5，Input MaxVoltage
- 6，End voltage（TVC）
- 7，Current setting
- 8，NiMH setting (PeakV)
- 9，Cycle setting
- 10，Power mode setting
- 11，Smart battery
- Charge and discharge work
- System settings
- other functions
- Specification
@ ToolkitRC 2020
28
25.20V：S
econd channel main port voltage.
10.00A：
Second channel main port current.
060:59：Second channel working time.
1888mAh：Cumulative capacity of the second channel.
1 4.202V：
1st battery voltage
.......
4 4.200V：4th battery voltage(this cell is in balance
management)
-.--V ：
No battery connected
Scroll [Scroll Wheel] to switch to the second column
of the second channel, which is the internal resistance
information. As shown below.
1 14mΩ：Internal resistance of the first battery
......
Scroll [Scroll Wheel] to switch to the third column of
the second channel, which is the information bar. As